Products,services and for sale items for members

<<

gotwind

Senior

Posts: 1583

Joined: Mon Nov 16, 2009 2:27 pm

Post Thu Jan 01, 1970 1:00 am

Please post any services you can offer Forum memb

Please post any services you can offer Forum members in this topic.

Also any items you have for sale, this topic will remain sticky and at the top of page, so remember to keep an eye on it.

Ben.
<<

keithw2112

Junior

Posts: 103

Joined: Mon Nov 16, 2009 2:27 pm

Post Thu Jan 01, 1970 1:00 am

Ok, Just to kick off proceedings, I have three it

Ok, Just to kick off proceedings, I have three items of possible interest on ebay at the moment:

My Ametek 30 (ends 21.00 tonight)
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=120210551854&ssPageName=STRK:MESE:IT&ih=002

My turbine chassis for my Ametek (ends 21.15)
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=120210548414&ssPageName=STRK:MESE:IT&ih=002

And lastly a Varta 60Ah leisure battery (I have eight of them) (ends 21.30)
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=120210563171&ssPageName=STRK:MESE:IT&ih=002

Thanks

Del.
<<

keithw2112

Junior

Posts: 103

Joined: Mon Nov 16, 2009 2:27 pm

Post Thu Jan 01, 1970 1:00 am

am after a set of blades 18 to 24 inch for my ame

am after a set of blades 18 to 24 inch for my ametek if anybody got a spare set lying around pref bens plans type
<<

bs85

User avatar

Posts: 10

Joined: Tue Nov 03, 2009 7:50 pm

Location: East Yorkshire UK

Post Thu Jan 01, 1970 1:00 am

Now that i have a couple of 24v Futurenergy PMGs

Now that i have a couple of 24v Futurenergy PMGs my 12v PMG is for sale on Ebay

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140202569096

Brian
<<

allen

Posts: 0

Joined: Mon Nov 16, 2009 2:27 pm

Post Thu Jan 01, 1970 1:00 am

Hi,
I have the strong rare earth neodymium m

Hi,
I have the strong rare earth neodymium magnets for wind generators, wind generator blades for sale here at:

www.magnet4less.com
<<

litespeed

Posts: 57

Joined: Mon Nov 16, 2009 2:27 pm

Post Thu Jan 01, 1970 1:00 am

I want to post this for the guys in the UK as wel

I want to post this for the guys in the UK as well as the guys in the U.S.

I think what is happening on ebay is ridiculous. In some cases full retail and then some. In some cases it is the other way around. This is my personal opinion. Opinions vary. I would hope that if someone here had something to sell... They would try to sell it here first (out of ebay). And for a reasonable price.

Most of the people I know here (locally) avoid ebay like the "plague" (Now).

However... Ebay is good for buyer protection when dealing with long distances and or buyer protection.

Anyway... I have access to several local surplus stores here. I would be willing to help anyone out that is looking for a specific item if they specify. IE: Motors, parts, etc...

For example... I just picked up an Ametek motor from this store for $20 I charged the guy $25 in fuel to pick it up (it is a distance from here). Plus shipping is under $67. Most of the motors alone are selling for over $100 to $130 on ebay plus shipping? What is wrong with this picture? We need to be helping each other... Not shooting everyone in the foot.

Just a thought...



AJ

Whats that noise!? Uh Oh!...

<<

donniedingle

Junior

Posts: 105

Joined: Mon Nov 16, 2009 2:27 pm

Location: scottish highlands

Post Thu Jan 01, 1970 1:00 am

Hi Litespeed
You are spot on with eba

Hi Litespeed
You are spot on with ebay situation, its just out of hand, and i agree with the trying to sell it on here first than to just put links to ebay sales, after all we are all chaseing the same cause and on a limited budget.
Nice of you to offer the service with the motors Litespeed, im sure it will be very appreciated. I myself may be interested at a later date.

Regards Donnie.

just keep her spinning..
<<

Scooter

Posts: 0

Joined: Mon Nov 16, 2009 2:27 pm

Post Thu Jan 01, 1970 1:00 am

Hi everyone,

Just started looking into

Hi everyone,

Just started looking into building myself a wind generator, got the plans which are excellant and am now trying to source myself a Ametec 30v or 40v. I live in windy Fife Scotland. Any ideas??
<<

donniedingle

Junior

Posts: 105

Joined: Mon Nov 16, 2009 2:27 pm

Location: scottish highlands

Post Thu Jan 01, 1970 1:00 am

Hi fellow windies,
Just letting you

Hi fellow windies,
Just letting you know about these blades i got made for my fururenergy pmg,

http://cgi.ebay.co.uk/5-FOOT-GLASS-FIBRE-WIND-TURBINE-BLADES-HUB-CONE_W0QQitemZ280204053015QQihZ018QQcategoryZ41981QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

regards donnie.

just keep her spinning..
<<

gotwind

Senior

Posts: 1583

Joined: Mon Nov 16, 2009 2:27 pm

Post Thu Jan 01, 1970 1:00 am

Donnie,
They are just pvc blades with a fibr

Donnie,
They are just pvc blades with a fibre glass hub - they are exactly the same as the ones i sell plans for.
There will be no airfoil on them, and wont perform well with the fururenergy pmg in my opinion.
The title is very misleading, and he should be told.
5 FOOT GLASS FIBRE WIND TURBINE BLADES, HUB & CONE
Next

Return to Archive (Read only, Locked)

Who is online

Users browsing this forum: No registered users and 3 guests

cron